2003 Chevy Astro ABS/Brake lights

Tiny
BRETMOUA
  • MEMBER
  • 2003 CHEVROLET ASTRO
2003 Chevy Astro

Just recently my brake and abs light has both come on at the same time. When it wants to, it'll both go away at the same time. It's been on and off for both lights a lot lately. What can be wrong? Bad solenoid, or sensor? Where and how can I fix that problem? No blown fuse, or leaks anywhere.
Do you
have the same problem?
Yes
No
Wednesday, June 18th, 2008 AT 8:13 PM

5 Replies

Tiny
LEGITIMATE007
  • MECHANIC
  • 5,121 POSTS
I believe you may have a chipped tone ring on one of your hubs, do you have a hard pedal then soft sometimes?
Was this
answer
helpful?
Yes
No
Wednesday, June 18th, 2008 AT 8:22 PM
Tiny
BRETMOUA
  • MEMBER
  • 7 POSTS
I forgot to mention that the mechanic gave me a code number that had to do something with the EMBC relay or something like that.
To answer your question, the brake does not go from soft to hard at all. Stays the same throughout the ride.
Was this
answer
helpful?
Yes
No
Wednesday, June 18th, 2008 AT 9:08 PM
Tiny
LEGITIMATE007
  • MECHANIC
  • 5,121 POSTS
Embc relay doesnt sound familiar to me, ill check with the guys and see if they can clear this up.
Was this
answer
helpful?
Yes
No
Thursday, June 19th, 2008 AT 5:44 AM
Tiny
LEGITIMATE007
  • MECHANIC
  • 5,121 POSTS
Go to autozone and have them scan your system for good measure, they can extract some trouble codes. Bring them to me. Theyll do it for free. The mechanic that your going to doesnt seem to be too clear on this.
Was this
answer
helpful?
Yes
No
Thursday, June 19th, 2008 AT 5:54 AM
Tiny
LEGITIMATE007
  • MECHANIC
  • 5,121 POSTS
I found out what that is, EBCM electronic brake control module. You have to get the specific codes for this, otherwise we wont know whats going on, there are too many possibilities with the ebcm.
Was this
answer
helpful?
Yes
No
Thursday, June 19th, 2008 AT 6:13 AM

Please login or register to post a reply.

Sponsored links