SPONSORED LINKS

1998 Buick Park Avenue

Tiny
JLAURUHN
  • MEMBER
  • 1998 BUICK PARK AVENUE
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 68,000 MILES
Car makes a gear grinding noise and vibration while accelerating around right hand corners at residential speeds. There is no noise or vibration while coasting around same corners.
Tuesday, August 17th, 2010 AT 10:58 AM

1 Reply

Tiny
MMPRINCE4000
  • MECHANIC
  • 8,549 POSTS
Inspect CV boots (outer) for rips/tears and grease leaking.
It is most likely a bad CV joint. This usually occurs when you run over some road deris and CV boot is torn and lubricant leaks out. The CV joint then gets water in it and causes the joint to wear prematurely.

You would have to replace the CV axle. While boot kits are available, it is far easier to replace the complete CV axle rather than the boot.
New CV axles usually run about $75. Labor will usually run around 2-3 hours.


https://www.2carpros.com/forum/automotive_pictures/108325_CV_axle_1.jpg

SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, August 17th, 2010 AT 11:17 AM

Please login or register to post a reply.

Related Noise Grind Content

Grinding Noises
GUIDE
Grinding Noises
This is one of the most popular grinding noises that can occur, this noise can be generated whether the brakes are being used or not. When the brake pads or shoes have worn...
VIEW MORE

Sponsored links