2010 Ford Ranger A/C

Tiny
ZINCCHLORIDE
  • MEMBER
  • 2010 FORD RANGER
  • 4 CYL
  • 2WD
  • AUTOMATIC
A/C works great on "max A/C" and the blower speeds all work great. But when you switch it to regular A/C something under the passenger dash sounds like it shuts off and it blows hot air.
Do you
have the same problem?
Yes
No
Sunday, November 1st, 2015 AT 7:27 AM

4 Replies

Tiny
HMAC300
  • EXPERT
Try pulling your hvac fuse inside truck it may reset the actuators and work if not it sounds like your temp actuator is screwing up or maybe the control head is bad which will require a scanning by pro
Was this
answer
helpful?
Yes
No
Sunday, November 1st, 2015 AT 7:50 AM
Tiny
ZINCCHLORIDE
  • MEMBER
Awesome, Thanks. I will do so shortly and let you know if it works. :)
Was this
answer
helpful?
Yes
No
Sunday, November 1st, 2015 AT 5:46 PM
Tiny
ZINCCHLORIDE
  • MEMBER
I can't find any reference or fuse labeled hvac. Do you have a diagram?
Was this
answer
helpful?
Yes
No
Sunday, November 1st, 2015 AT 5:59 PM
Tiny
HMAC300
  • EXPERT
Fuse 27
Was this
answer
helpful?
Yes
No
Monday, November 2nd, 2015 AT 6:10 AM

Please login or register to post a reply.

Recommended Guides