2009 Ford F-150 cam censor codes

2009 FORD F-150
14,228,700 MILES • 5.4L • V8 • 2WD • AUTOMATIC
Avatar
CHRIS WESTON
  • MEMBER
  • 1 POST
Trying to go dead while driving, & at ideal
Feb 6, 2015 at 5:10 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
HMAC300
  • CAR REPAIR CONTRIBUTOR
  • 48,601 POSTS
check fuel pressure with a gauge and scan for codes autoparts rent gauge
Feb 6, 2015 at 5:48 AM
Advertisement
Avatar
STRAILER
  • CAR REPAIR CONTRIBUTOR
  • 54,209 POSTS
With that many miles you might have a timing chain issue, does the engine make noise at idle? Also make sure the engine oil is full and clean with a new oil filter because the camshaft actuators depend on oil to operate correctly. Here are the locations of the camshaft sensor but without the codes we don't know which one you need to replace. please use this guide to help find out.

https://www.2carpros.com/articles/checking-a-service-engine-soon-or-check-engine-light-on-or-flashing

Check out the images (below). Please let us know what happens.


Jul 17, 2024 at 6:23 PM