2008 Kia Optima kia optima oil issues

2008 KIA OPTIMA
192,000 MILES
Avatar
BMBROADHURST
  • MEMBER
  • 2 POSTS
started with wrong oil filter causing low oil pressure. Then driving on highway the low oil light came on, Stopped and checked the oil, it was fine so I headed hoe. Then the car shut off. I was able to get it started after it sat for about 15 minutes. Sounds like it is missing or running on only 3 cylinders (v6). Now it will only run at high rpm (no idle possible)and the engine light is flashing. Shut shut it down. What's wrong?
Aug 20, 2013 at 7:28 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
HMAC300
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 48,601 POSTS
scan for codes and check fuel pressure with a gauge first
Aug 21, 2013 at 6:54 AM
Advertisement
Avatar
BMBROADHURST
  • MEMBER
  • 2 POSTS
bought a hand ner for $60.00 at auto zone.
scanned for coded and have 5
p0018, p0300, p0302, p0304, p0354
I do not have a pressure gauge for the fuel system sorry.
Aug 24, 2013 at 6:01 PM
Avatar
HMAC300
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 48,601 POSTS
for the p0300 codes,check compression on your engine it should be within 20% of each other if not you have a n internal problem. like abad valve, piston etc.the 300 ocdes shold be checked by a professional however as these codes can be amultitude of things wrong and are very hard to diagnose if not a simple thing. the p0018 code is a camshaft correlation with crank position sensor which you cannot fix. this has to be done by a professional with a pro scanner to see how far it is off which maybe chain failure due to oil leakage.
Aug 24, 2013 at 6:24 PM