2008 Chevrolet Silverado Check Engine Light

BMAGYA4EVER

MEMBER
2008 CHEVROLET SILVERADO
60,000 MILES

I have a 2008 Chevy Silverado, V-8, and the "Check Engine" light came on a few days ago. The OBD-II test came out with a "P0442" reading. I had not recently put gas in the truck, but checked the gas cap anyway and it appeared to be fine. I purchased a new gas cap ($12), filled the tank and the light still did not turn off. I have driven it several times since then with no success of the light turning off. Do I need to have the light reset, or what is my next step in finding the problem?

3 Replies

SATURNTECH9

MECHANIC
30,870 POSTS

Have the code cleared with a.scan.tool and see if the code returns. This gudie can help you

https://www.2carpros.com/articles/checking-a-service-engine-soon-or-check-engine-light-on-or-flashing

Please run down this guide and report back.

SPONSORED LINKS

Was this

answer

helpful?

Yes

No

+4

Wednesday, April 14th, 2021 AT 6:39 PM

BMAGYA4EVER

MEMBER
2 POSTS

I don't have a personal scan tool. Can a place like Auto Zone clear the scan for free or will it cost to have the code cleared at a mechanic shop? I know some vehicles can clear codes by turning the ignition key to the "on" position several times. Can I do this with my truck?

Was this

answer

helpful?

Yes

No

+1

Wednesday, April 14th, 2021 AT 6:39 PM

SATURNTECH9

MECHANIC
30,870 POSTS

If. You don't live in California auto zone can. Clear them for. Free. It's best to clear it with code. Reader. You get a. Basic. Code reader on. Amazon. For. 20

Was this

answer

helpful?

Yes

No

+3

Wednesday, April 14th, 2021 AT 6:39 PM