When I go down a steep hill or turn right or left while applying the brakes, the "service stabilitrack" light and warning comes on. I have checked the tire air pressure to 32 lbs and topped off the brake fluid.
Any fault codes in the system? Remember that not all codes will set a check light.
September, 15, 2011 AT 12:02 AM
A 2006 will require a scan tool to access the ABS(stabilitrak) system, it does not have on-board as an 05 would. A typical code reader will only obtain powertrain codes. Since the fault is occurring, it should be setting a code.