TCS/slip light is on

RENA 260

MEMBER
2005 NISSAN MAXIMA
15,200 MILES

My tcs and slip lights go off and on my dash board . My car cuts off every now and.O can small brakes and thr back!Why is it do that

Friday, June 8th, 2012 AT 9:26 AM

8 Replies

KHLOW2008

MECHANIC
41,815 POSTS

Get a scan done to check for trouble codes and post them here.

SPONSORED LINKS

Was this

answer

helpful?

Yes

Friday, June 8th, 2012 AT 12:30 PM

RENA 260

MEMBER
5 POSTS

P0021 and p0340

Was this

answer

helpful?

Yes

Friday, June 8th, 2012 AT 8:04 PM

KHLOW2008

MECHANIC
41,815 POSTS

P0340 is a misfire in cylinder # 4.

P0021 is a fault with the IVT control.

The TCS and Slip indicators are nothing to worry about. Getting the above 2 codes resolved would stop them from coming on.

Was this

answer

helpful?

Yes

Saturday, June 9th, 2012 AT 3:45 PM

RENA 260

MEMBER
5 POSTS

What would be the best solution

Was this

answer

helpful?

Yes

Saturday, June 9th, 2012 AT 6:55 PM

KHLOW2008

MECHANIC
41,815 POSTS

There are no such thing as best soluion for this. You need to find out what is causing the problem. Both codes could be related.

Check the engine oil level. If engine is heavily sludged, it can occur. Check the spark plugs and ignition coils, especially for cylinder # 4.

SPONSORED LINKS

Was this

answer

helpful?

Yes

Saturday, June 9th, 2012 AT 7:52 PM

RENA 260

MEMBER
5 POSTS

The code was p0340 and p0021

Was this

answer

helpful?

Yes

Saturday, June 9th, 2012 AT 8:59 PM

RENA 260

MEMBER
5 POSTS

I did a tune up and when I went the guy at midas told me the spark plugs wasnt the correct size for my car

Was this

answer

helpful?

Yes

Saturday, June 9th, 2012 AT 9:01 PM

KHLOW2008

MECHANIC
41,815 POSTS

Wrong plugs can result in misfirings but it would most probably show multiple misfiring. This can also cause the P0021, so get the misfiring resolved and see if this code is cleared as well.

Was this

answer

helpful?

Yes

Sunday, June 10th, 2012 AT 12:00 PM