SPONSORED LINKS

2005 Mitsubishi Outlander replacing handbrake shoes

Tiny
POZZE
  • MEMBER
  • 2005 MITSUBISHI OUTLANDER
  • 150,000 MILES
Can brake shoes handbrake be replaced without the removal of axle or axle hub seems very little room to remove anti rattle spring or replace same or adjuster springs very little splace to work any infor helpful thanks
Wednesday, September 25th, 2013 AT 3:26 AM

3 Replies

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,170 POSTS
If you have 4 wheel disc brakes, the rotor has to come off.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, September 25th, 2013 AT 5:33 AM
Tiny
POZZE
  • MEMBER
  • 2 POSTS
Thanks obvious that rotor has to come off, when rotor and brake drum removed does hub have to c ome off also as very little room behind hub to get and springs etc. Question is does axle have and axle hub have to be removed or can you get and anti raattle springs and adjusters behind hub thanks
Was this
answer
helpful?
Yes
No
Wednesday, September 25th, 2013 AT 3:54 PM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,170 POSTS
Once the drum/rotor is removed, you can get to the springs.
Was this
answer
helpful?
Yes
No
Wednesday, September 25th, 2013 AT 5:40 PM

Please login or register to post a reply.

Related Parking Brake Shoe Replace/Remove Content

Parking Brake Shoe Replacement
VIDEO
Parking Brake Shoe Replacement
Instructional repair video
Parking Brake Shoe Replacement
GUIDE
Parking Brake Shoe Replacement
You will need to remove the wheels and raise the vehicle off of the ground by using a floor jack and securing it safely using jack stands. Next the brake pads, caliper, ...

Sponsored links