MY TRUCK'S ENGINE CRACKING BUT NO START!!!

2005 Ford F-550

Tiny

smoken

February, 1, 2012 AT 6:05 PM

I tried many times to start the truck but it doesnt start. Its just cranking.

I checked DTCs code. At first there were no code. But after many attempts to start the engine, one code comes up.

P0611 - FICM Performance

I cleared the DTC twice to get rid of it. But it appeared again sometimes.


Therefore, I removed the FICM Module & cleaned the three connectors then installed it after 10 Minutes. The engine started successfully for just 30 seconds : ( then shutdown.

it works for 30 seconds if I remove it for 10 minutes then install it.

I tried installing a F350 FICM module (It dosnt have the same part number exactly), the engine starts for 30 seconds again the shutdown.

Im afraid of buying a new FICM Module for no avail.

P.S. I tried to reprogramming the FICM but no avail.

FOUND 50469 RELATED QUESTIONS

2 Answers

Tiny

fixitmr

February, 1, 2012 AT 6:51 PM

Try this page .http://www.bscustoms.net/diesel/FICM.pdf

Tiny

fixitmr

February, 1, 2012 AT 6:53 PM

Please login or register to post a reply.

Crankshaft Position Sensor Replace Chevrolet
Crank Angle Sensor Replacement Mercedes Benz
Fuel Pump Replacement Done Right
Fuel Pump Replacement