BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
Jaguar XJ8 Belt Problem
2004 JAGUAR XJ8
How would I replace my serpentine belt in my Jaguar?
Wednesday, December 19th, 2012 AT 10:58 PM
Accessory Drive Belt - 3.5L/4.2L (12.10.40)
Disconnect the battery ground cable.
Remove the air cleaner outlet pipe.
Vehicles with supercharger
Remove the supercharger belt.
Detach the accessory drive belt.
1) Rotate the accessory drive belt tensioner counter-clockwise.
Use a 3/8 inch square drive bar to rotate the accessory drive belt tensioner.
2) Detach the accessory drive belt.
Remove the accessory drive belt.
1) Remove the accessory drive belt tensioner retaining bolt.
2) Remove the accessory drive belt tensioner.
3) Remove the accessory drive belt.
To install, reverse the removal procedure.
Tighten to 40 Nm.
Wednesday, December 19th, 2012 AT 11:52 PM
to post a reply.
Related Serpentine Belt Replace/Remove Content
Can You Help Me Locate The Engine Mounts On My Jag
The Engine Jumps When I Give It Gas And Now I Have Restricted Performance On The Dash. First I Would Give It Gas And The Back Wheel On The...
1998 Jaguar Xj8 Mass Air Flow
Engine Mechanical Problem 1998 Jaguar Xj8 V8 Two Wheel Drive Automatic 97000 Miles Simple Question. Is The Mass Air Flow "meter" The...
Oil Change Overfill
I Had An Oil Change (car Running Fine Prior) Directly After The Oil Change Car Began To Hesitate While Driving Then Started To Chug. I Took...
1999 Jaguar Xj8 Secondary Timing Chain
Engine Mechanical Problem 1999 Jaguar Xj8 V8 Two Wheel Drive Automatic 96000 Miles Do They Make A Masterlink For The Secondary Timing...
Jaguar Xj8 Oil Change
I Have A 2004 Xj8. I Need To Remove The Cover Panel Beneath The Car To Get To The Oil Pan And Filer. I Remove Most Of The Screws And Able...
Ask a Car Question. It's Free!
Oil Change & Filter Replacement Toyota
Engine Scraping Noises
Find a car manual for your car
© 1999 - 2018 2CarPros, Inc.