2004 Chrysler Pacifica Service Immobilizer

Tiny
BABIFABULUS
  • 2004 CHRYSLER PACIFICA
  • 162,000 MILES

I am having problems with my 2004 pacifica. My ignition switch fuse blew and car would not start. Once I replaced it, the car still would not start and now just says "system immobilizer" every time I try to start the car.

Do you
have the same problem?
Yes
No
Thursday, June 27th, 2013 AT 6:29 PM

2 Replies

Tiny
JACOBANDNICKOLAS
  • EXPERT
  • 68,398 POSTS

That sounds like an issue with the security system. I hate to say it, but you need a dealer that has the proper test equipment to check it. Otherwise, you will be replacing parts that are good.

Was this
answer
helpful?
Yes
No
Thursday, June 27th, 2013 AT 6:53 PM
Tiny
SEANGRANT00
  • EXPERT
  • 339 POSTS

The key has a transponder programmed to the ignition switch. You might have to take the car to a dealership to use a DRB III scan tool to reprogram the computer to accept the key. I attached an image to relearn the key so you can try that and let me know if it works.

Was this
answer
helpful?
Yes
No
-2
Thursday, June 27th, 2013 AT 6:58 PM

Please login or register to post a reply.

Other Immobilizer Replace/Remove Questions