How to change the fly wheel out

Tiny
JAMIE06REMINGTON
  • MEMBER
  • 2004 CHEVROLET CHEYENNE
  • V8
  • 2WD
  • AUTOMATIC
  • 200,000 MILES
The new fly wheel has a spacer how do I get the one off the moter
Tuesday, March 22nd, 2011 AT 1:35 AM

2 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Usually the spacer goes on teh outside of the flywheel, but if you take a small chisel and get behind it andgo all the way around to loosen it, it should come off.
Was this
answer
helpful?
Yes
No
Tuesday, April 5th, 2011 AT 11:48 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
If you are talking about the piece in the center you need a tool to remove it or sometimes if you pack it with grease and push a rod in the center it will push the old one out. Here is apic.
Image (Click to make bigger)
Thumb
Was this
answer
helpful?
Yes
No
Tuesday, April 5th, 2011 AT 11:52 PM

Please login or register to post a reply.

Related Flywheel Replace/Remove Content

Flywheel Replacement
GUIDE
Flywheel Replacement
An engine flywheel is used to couple the engine to the transmission while holding the clutch assembly. When replacing a flywheel the transmission and clutch must be removed...
VIEW MORE