High beams do not work

Tiny
ANONYMOUS
  • MEMBER
  • 2003 TOYOTA LANDCRUISER
  • 290,000 MILES
Hi I have a HZJ79 Landcruiser ute. The Low beams work but the high beams do not and this has occurred just recently. The fuses and globes in the headlights are ok and I thought it could be the relay. Does this model have a high and low beam relay switch and where can I find them.
Cheers nick
Thursday, October 25th, 2012 AT 1:37 AM

3 Replies

Tiny
MHPAUTOS
  • EXPERT
There should be a relay on the drivers side of the engine bay near the radiator, I will check a manual and re post what I find.
Was this
answer
helpful?
Yes
No
+1
Thursday, October 25th, 2012 AT 9:01 AM
Tiny
KEN
  • ADMIN
It does sounds like you have a relay or fuse that is out here are two guides and the headlight wiring fuse and relay locations so you can run an easy test to get the problem fixed.

https://www.2carpros.com/articles/how-to-check-a-car-fuse

and

https://www.2carpros.com/articles/how-to-check-an-electrical-relay-and-wiring-control-circuit

Check out the diagrams (Below)

Please let us know what you find. We are interested to see what it is.

Cheers, Ken
Was this
answer
helpful?
Yes
No
Thursday, April 27th, 2017 AT 10:05 AM
Tiny
96REALWE
  • MEMBER
I had this problem as well, the relay for the high beams fixed it :) I love this site.
Was this
answer
helpful?
Yes
No
Friday, April 27th, 2018 AT 10:55 AM

Please login or register to post a reply.

Recommended Guides