Saturday, July 28th, 2012 AT 4:20 AM
DCSAUTOREPAIR2
- MEMBER
- 2003 FORD TAURUS
- 175,640 MILES
Where is the cam sensor located?
SPONSORED LINKS
Where is the camshaft sensor located
5 Replies
WRENCHTECH
- MECHANIC
- 20,757 POSTS
Hello,
The camshaft sensor is located at the rear of the engine on top here is a guide to help walk you through the repair with diagrams below to show the location.
https://www.2carpros.com/articles/camshaft-angle-sensor-replacement
Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.
The camshaft sensor is located at the rear of the engine on top here is a guide to help walk you through the repair with diagrams below to show the location.
https://www.2carpros.com/articles/camshaft-angle-sensor-replacement
Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.
Image (Click to make bigger)
SPONSORED LINKS
Was this helpful?
Yes
No
+1
Saturday, July 28th, 2012 AT 10:10 AM
DEVILDAWG
- MEMBER
- 1 POST
- 2002 FORD TAURUS
Hello!
I own a 2002 Taurus with 86,000+ miles on it. The engine is the DOHC V6 (Duratech 30, I believe). I have had an incresingly frequent problem with the engine misfiring, exasperated when a load is on the engine at idle (AC, defroster, etc). Had the codes pulled, and received a 0316 - camshaft position sensor (done at a national AP chain store). Seems to make sense, but I am having difficulty locating proper repair information for this problem. I am fairly confident that I can perform the repair myself, so long as I don't have to spend hundreds of $$$ on specialty tools. It is my understanding the part runs about $140, but that most often the culprit is simply the electronics at the top of the spine.
I would appreciate very much the input of an expreienced machanic on this issue. Thank you in advance for taking the time here.
I own a 2002 Taurus with 86,000+ miles on it. The engine is the DOHC V6 (Duratech 30, I believe). I have had an incresingly frequent problem with the engine misfiring, exasperated when a load is on the engine at idle (AC, defroster, etc). Had the codes pulled, and received a 0316 - camshaft position sensor (done at a national AP chain store). Seems to make sense, but I am having difficulty locating proper repair information for this problem. I am fairly confident that I can perform the repair myself, so long as I don't have to spend hundreds of $$$ on specialty tools. It is my understanding the part runs about $140, but that most often the culprit is simply the electronics at the top of the spine.
I would appreciate very much the input of an expreienced machanic on this issue. Thank you in advance for taking the time here.
Was this helpful?
Yes
No
-1
Tuesday, August 6th, 2019 AT 3:44 PM
(Merged)
MERLIN2021
- MECHANIC
- 17,250 POSTS
According to Mitchell, no special tools on the DOHC models, only require a synchonizer on SOHC models!
Just make sure the O ring is in place...
Just make sure the O ring is in place...
Was this helpful?
Yes
No
+1
Tuesday, August 6th, 2019 AT 3:44 PM
(Merged)
BNRITTEL
- MEMBER
- 1 POST
- 2001 FORD TAURUS
Computer problem
2001 Ford Taurus 6 cyl Front Wheel Drive Automatic
cant find the cam sensor to replace it, engine light came on and had a diagnostic test done and it said it was the cam sensor. Can't locate to replace it.
2001 Ford Taurus 6 cyl Front Wheel Drive Automatic
cant find the cam sensor to replace it, engine light came on and had a diagnostic test done and it said it was the cam sensor. Can't locate to replace it.
Was this helpful?
Yes
No
Tuesday, August 6th, 2019 AT 3:44 PM
(Merged)
BMRFIXIT
- MECHANIC
- 19,053 POSTS
12 v 3.0 engine rear of engine between the two heads
24V 3.0 engine left front of engine below valve cover
24V 3.0 engine left front of engine below valve cover
SPONSORED LINKS
Was this helpful?
Yes
No
Tuesday, August 6th, 2019 AT 3:44 PM
(Merged)
Related Camshaft Camshaft Sensor Location Content
Sponsored links
SPONSORED LINKS
Topdon OBD2 Scanner Review - This thing rocks
