How to put mirror head on mirror base

Tiny
STEPHINE.SP@GMAIL.COM
  • 2003 CHRYSLER 300
  • 600,000 MILES

How do I put a 2003 Chrysler 300m mirror head on the mirror base and the wires are still connected

Do you
have the same problem?
Yes
No
Thursday, October 4th, 2012 AT 5:01 PM

1 Reply

Tiny
HMAC300
  • EXPERT
  • 49,814 POSTS

If htis is the mirror inside the car, the metal piece is held on by a screw and then needs to be taken off, clean glue off normally with a knife/sharp object. And then you can buy the glue anywhere they sell autoparts. It's a little tiny tube. Follow instrucktions on glue box. If it's an outside mirror glass shops normally charge around $20 and do it on the spot.

SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, October 4th, 2012 AT 5:19 PM

Please login or register to post a reply.

Related Cylinder Head Content

Got a Blown Head Gasket? Do This Test
VIDEO
Got a Blown Head Gasket? Do This Test
Instructual repair video
Cylinder Head
GUIDE
Cylinder Head

A cylinder head performs many tasks such as holding and controlling the combustion process while allowing intake and exhaust gases to enter and exit the engine. Featured...

VIEW MORE

Recommended Guides