SPONSORED LINKS

Mt CTS t/c shows up on the screen and the reduce.

Tiny
RAMONKM
  • MEMBER
  • 2003 CADILLAC CTS
  • 87,000 MILES
Mt cts t/c shows up on the screen and the reduce engine speed pops up after that then it's followed by my transmission shifting hard and making a loud sound, can yo help please?
Thursday, October 18th, 2012 AT 7:53 PM

13 Replies

Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Your going to have to have all the computers in your car scanned for codes and get the exact code numbers you have. Its not going to be a easy diagnoses most likely.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, October 18th, 2012 AT 7:57 PM
Tiny
RAMONKM
  • MEMBER
  • 17 POSTS
Thanks I'll get back to you with the codes.
Was this
answer
helpful?
Yes
No
Thursday, October 18th, 2012 AT 8:07 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Alright make sure you have it scaqanned with more then just a basic diyer scan tool that can read all the computers and not just the engine and transmission ones.
Was this
answer
helpful?
Yes
No
Thursday, October 18th, 2012 AT 8:11 PM
Tiny
RAMONKM
  • MEMBER
  • 17 POSTS
Hey sorry to get back so late to you but here are the codes here goes.
P2176
P0638
P2135
P0121
P0221
P2119
B00652
P1779
P1917
B2019
B15a0
Was this
answer
helpful?
Yes
No
Wednesday, October 24th, 2012 AT 10:38 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
You have a ton of throttle postion coedes and throttle circuit codes plus some codes I cant find that exist for that car. Lets start with the code P0221. Do you have a multimeter to do some testing?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, October 25th, 2012 AT 11:28 PM
Tiny
RAMONKM
  • MEMBER
  • 17 POSTS
I don't but my mechanic may, is
There an electrical problem as well like the engine harness wire? Do you think I need a new throttle body cause I change the throttle position sensor already and I had the computer relearn it to calibrate it.
Was this
answer
helpful?
Yes
No
Saturday, October 27th, 2012 AT 12:38 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
With doing some testing cant really answer those questions.
Was this
answer
helpful?
Yes
No
Saturday, October 27th, 2012 AT 2:02 AM
Tiny
RAMONKM
  • MEMBER
  • 17 POSTS
When get the mutimeter where should start testing and what should I be looking for?
Was this
answer
helpful?
Yes
No
Saturday, October 27th, 2012 AT 8:43 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
How did you replace the tps when its part of the throttle body?You will also need a scan tool that reads livew data to monitor the tps readings for the first part of the test.
Was this
answer
helpful?
Yes
No
Saturday, October 27th, 2012 AT 11:57 PM
Tiny
RAMONKM
  • MEMBER
  • 17 POSTS
Sorry I meant I replaced the throttle pedal sensor.
Was this
answer
helpful?
Yes
No
Sunday, October 28th, 2012 AT 1:24 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Oh ok to diagnose the code P0221 whjch is where I would start with the codes you need scan tool that can read tps readings etc and a multi meter.
Was this
answer
helpful?
Yes
No
Monday, October 29th, 2012 AT 4:33 PM
Tiny
RAMONKM
  • MEMBER
  • 17 POSTS
Guess what I found out the problem, when I remove the harness wire form the tps I notice that there are 6 prongs inside and two were bent, once I straighten them up and places the harness back in carefully it ran perfect.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, December 11th, 2012 AT 10:51 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Wow you got lucky on that one I wonder how they got bent?Glad to hear you found the problem.
Was this
answer
helpful?
Yes
No
Tuesday, December 11th, 2012 AT 11:24 PM

Please login or register to post a reply.

Related Transmission Filter Content

VIEW MORE

Sponsored links