Errattic idle.

Tiny
JERMAINE2015
  • MEMBER
  • 2002 NISSAN SENTRA
  • 127,564 MILES
My car.6 speed. Is reving. Up and down. From. 1000rpm. To 2000 rpm. Like the car is getting to much. Air.
Do you
have the same problem?
Yes
No
Friday, March 9th, 2012 AT 5:25 AM

29 Replies

Tiny
FIXITMR
  • MEMBER
Sounds right.
Was this
answer
helpful?
Yes
No
Friday, March 9th, 2012 AT 6:10 AM
Tiny
JERMAINE2015
  • MEMBER
So what should I do. No lines are loose.
Was this
answer
helpful?
Yes
No
-1
Friday, March 9th, 2012 AT 6:43 AM
Tiny
FIXITMR
  • MEMBER
Did it start doing this suddenly? Anything happen before?
Was this
answer
helpful?
Yes
No
+2
Friday, March 9th, 2012 AT 7:04 AM
Tiny
FIXITMR
  • MEMBER
Is CEl on? Cods to read?
Was this
answer
helpful?
Yes
No
-2
Friday, March 9th, 2012 AT 7:58 AM
Tiny
JERMAINE2015
  • MEMBER
What's cei. And I got this code back. Po507. Another thing. If I put a cold
Air intake on will I have to put it on dyno for fine tuning.
Was this
answer
helpful?
Yes
No
Friday, March 9th, 2012 AT 8:32 AM
Tiny
FIXITMR
  • MEMBER
Check engine light. For mod questions best to go t internet mod forum for your car.
Was this
answer
helpful?
Yes
No
Saturday, March 10th, 2012 AT 12:42 AM
Tiny
JERMAINE2015
  • MEMBER
It threw back tps senors would. Tht do. That.
Was this
answer
helpful?
Yes
No
+1
Saturday, March 10th, 2012 AT 3:26 AM
Tiny
FIXITMR
  • MEMBER
Yah that can mess with fuel proportioning confusing computer.
Was this
answer
helpful?
Yes
No
+1
Saturday, March 10th, 2012 AT 9:12 AM
Tiny
JERMAINE2015
  • MEMBER
Now car wont I took car out yesterday came back and now wont start
Was this
answer
helpful?
Yes
No
Sunday, March 11th, 2012 AT 1:10 AM
Tiny
KHLOW2008
  • EXPERT
Did you try starting with foot on accelerator pedal?
If the TPS is bad or out of adjustment, it can result in non starting without the aid of the accelerator pedal.

As to the TPS, try clearing the codes and see if they come back. What was the EXACT code you are getting?

P0507 is a fault with the IAACor idle control system and can be due to vacuum leakages etc.
Was this
answer
helpful?
Yes
No
+1
Sunday, March 11th, 2012 AT 7:12 AM
Tiny
JERMAINE2015
  • MEMBER
But I'm turning my key and getting nothing. And that's. The code I got back.
Was this
answer
helpful?
Yes
No
Sunday, March 11th, 2012 AT 3:32 PM
Tiny
KHLOW2008
  • EXPERT
Turning and nothing happens indicates a fault with the starting system and it can be a flat battery, ignition switch, starter motor or security system.
Was this
answer
helpful?
Yes
No
+1
Sunday, March 11th, 2012 AT 7:50 PM
Tiny
JERMAINE2015
  • MEMBER
If I jump the. Starter will tht bypass engaging clutch. Cuz if so I did and the starter just was spining
Was this
answer
helpful?
Yes
No
Sunday, March 11th, 2012 AT 10:50 PM
Tiny
KHLOW2008
  • EXPERT
How did you jump the starter?
Was this
answer
helpful?
Yes
No
Monday, March 12th, 2012 AT 12:35 PM
Tiny
JERMAINE2015
  • MEMBER
Touching the bolt wire. And the other. One and all it. Did was spin.
Was this
answer
helpful?
Yes
No
Monday, March 12th, 2012 AT 4:53 PM
Tiny
KHLOW2008
  • EXPERT
The solenoid has to click for the starter gears to kick out to engage. What you need to do is to apply battery voltage to the starter solenoid wire, the small one to see if it turns.
Was this
answer
helpful?
Yes
No
Monday, March 12th, 2012 AT 5:53 PM
Tiny
FIXITMR
  • MEMBER
Yah you crossed big bolts instead of hot big bolt and small wire post.
Was this
answer
helpful?
Yes
No
Tuesday, March 13th, 2012 AT 4:28 AM
Tiny
JERMAINE2015
  • MEMBER
K its not starter. How can I. Find out. About. Me not gettin power to starter
Was this
answer
helpful?
Yes
No
Tuesday, March 13th, 2012 AT 5:42 AM
Tiny
FIXITMR
  • MEMBER
Is it manual trans?
Was this
answer
helpful?
Yes
No
Tuesday, March 13th, 2012 AT 6:09 AM
Tiny
FIXITMR
  • MEMBER
Fuse #20 inside also clutch/trans switch and relay in underhood box.
Was this
answer
helpful?
Yes
No
Tuesday, March 13th, 2012 AT 6:15 AM

Please login or register to post a reply.

Recommended Guides