2002 Dodge Durango no spark

Tiny
KSREDDNEK
  • MEMBER
  • 2002 DODGE DURANGO
  • 150,000 MILES
My dodge durango has no spark I replaced the cam position sensor which is what the code reader said was bad and still nothing what else could it be
Do you
have the same problem?
Yes
No
Friday, November 11th, 2011 AT 4:09 PM

5 Replies

Tiny
WRENCHTECH
  • MEMBER
The code didn't tell you anything was bad. It merely said there was an issue within the circuit which needs to be further diagnosed. What was the code number?
Was this
answer
helpful?
Yes
No
Friday, November 11th, 2011 AT 4:43 PM
Tiny
KSREDDNEK
  • MEMBER
The full code P0340 camshaft position sensor (A circuit bank 1 or single sensor)
Was this
answer
helpful?
Yes
No
-1
Friday, November 11th, 2011 AT 4:49 PM
Tiny
WRENCHTECH
  • MEMBER
What engine does it have?
Was this
answer
helpful?
Yes
No
Friday, November 11th, 2011 AT 6:52 PM
Tiny
KSREDDNEK
  • MEMBER
4.7 liter
Was this
answer
helpful?
Yes
No
Friday, November 11th, 2011 AT 7:18 PM
Tiny
WRENCHTECH
  • MEMBER
SYMPTOM
P0340-NO CAM SIGNAL AT PCM

WHEN MONITORED
Engine cranking/running.

SET CONDITION
At least 5 seconds have elapsed with Crankshaft Position Sensor signals present but no Camshaft Position Sensor signal.

POSSIBLE CAUSES

* Crank position sensor signal
* Checking intermittent CMP signal with lab scope
* 5 Volt supply circuit shorted to ground
* 5 Volt supply circuit open
* 5 Volt supply circuit shorted to voltage
* CMP sensor signal circuit shorted ground
* CMP sensor signal circuit open
* CMP sensor signal circuit shorted to voltage
* CMP sensor signal shorted to 5 volt supply circuit
* CAM position sensor ground circuit open
* PCM - 5 Volt supply
* PCM - CMP sensor signal
* Camshaft position sensor
Was this
answer
helpful?
Yes
No
Friday, November 11th, 2011 AT 10:26 PM

Please login or register to post a reply.

Sponsored links