SPONSORED LINKS

2001 Hyundai XG300 Brain box socket

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Ok I thought it was something like that. Oh and I dont' need to be felt, just use us again
Was this
answer
helpful?
Yes
No
Monday, December 9th, 2013 AT 12:11 PM
Tiny
CONQUEROR
  • MEMBER
  • 40 POSTS
Hi,
The ECU of my hyundai XG 300 car is complaining about the Knock sensor and O2 sensor. We need to replace them. Please where are they located? An illustration diagram would be appreciated. Thanks
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, December 20th, 2013 AT 7:49 AM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
The knock sensor is under the intake manifold and the O2 sensor depending on bank 1 or 2 and if it's sensor 1 or not. Bank 1 is rh exhaust manifold and bank 2 is lh. Sensor 2's would be same only behind converters.
Was this
answer
helpful?
Yes
No
Friday, December 20th, 2013 AT 8:26 AM
Tiny
CONQUEROR
  • MEMBER
  • 40 POSTS
Thanks for the prompt answer. Please is there any diagram to show it? I have gotten the O2 sensor bank 1 as you illustrated.
Was this
answer
helpful?
Yes
No
+1
Friday, December 20th, 2013 AT 10:43 AM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
No diagrams or I would have sent it
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, December 20th, 2013 AT 11:38 AM
Tiny
CONQUEROR
  • MEMBER
  • 40 POSTS
Hi, my friend. Thanks for the other time. Please my Hyundai XG 300 car is having another problem. Please assist.
At the moment when I start the car in morning, it wont start. I will have to go and Unplug the Temperature Switch Sensor before it start running. After running, the engine runs bad but if I unplug the MAF harness, it run better not normal. Now it consumes more fuel. I tried to diagnose the ECU, so its bring out the following code: P0115, P0113, P0102, P1159, P1632, P1520, P1191, P1193, P0325. Please what do I do now?
Was this
answer
helpful?
Yes
No
Friday, May 23rd, 2014 AT 2:22 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Check battery for condition including load test autoparts check for free. A low battery will cause false codes. Part of your codes are form unplugging things then starting and running car there are none of the other codes you think you have.
Was this
answer
helpful?
Yes
No
Friday, May 23rd, 2014 AT 4:07 PM
Tiny
CONQUEROR
  • MEMBER
  • 40 POSTS
Ok. I will do that. I want to also inform u that I replaced the alternator recently. Can it be that the Alternator is not Generating the accurate voltage?
Was this
answer
helpful?
Yes
No
Friday, May 23rd, 2014 AT 9:35 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
The alternator could be the problem but a bad battery will make an alternator not charge correctly as well if at all.
Was this
answer
helpful?
Yes
No
Saturday, May 24th, 2014 AT 5:40 AM
Tiny
CONQUEROR
  • MEMBER
  • 40 POSTS
The battery is good. Pls can I get d C44-2 wire diagram. I want to check for possible continuity between d end of the wires.
Was this
answer
helpful?
Yes
No
-1
Sunday, June 1st, 2014 AT 8:53 AM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
No I remember you are the same guy a couple of months ago I told you are gong to have to live with this c44-2 belgons to your memory power and evidently that is screwed up due to your previous problem the orange wire goes to the ecm fuse in the fuse box under hood good luck with it and I have no further suggestions or comments.
Image (Click to make bigger)
Thumb
Was this
answer
helpful?
Yes
No
Sunday, June 1st, 2014 AT 11:26 AM
Tiny
CONQUEROR
  • MEMBER
  • 40 POSTS
Aiit. Thanks. This will also help.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, June 1st, 2014 AT 11:52 AM

Please login or register to post a reply.

Related Engine Computer Replace/Remove Content

VIEW MORE

Sponsored links