BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
2001 FORD FOCUS
How do you test the blower motor resistor in a 2001 ford focus se?
have the same problem?
Saturday, December 25th, 2010 AT 8:12 PM
You don't really test the resister itself. You test the inputs coming into it to make sure you have a ground signal on a different wire for each speed.
Saturday, December 25th, 2010 AT 10:26 PM
If i'm not getting any air out of the motor would I be safe to replace the resistor and see if it fixes the problem or is there another recommended route
Saturday, December 25th, 2010 AT 11:33 PM
Sure you can if you want to take the risk. That's your decision.
Saturday, December 25th, 2010 AT 11:38 PM
to post a reply.
Related Blower Fan Resistor Content
2001 Ford Focus Fan Speed Settings
My Fan Only Works On Setting 4, This Is The 3rd Time This Has Happened Both Times Before It Cost Me Almost $500 In Repairs And I Don't...
2003 Ford Focus Blower Fan Resistor
The Blower Fan On My 2003 Focus Was Only Working On The Highest Setting, So I Set Out To Replace The Resistor. I Plugged Into The New Unit...
Ford Focus 1.6 Lx Estate 2000 Model. Heater Only Works On High Setting, Changed Motor Twice, Same Fault. Heats Fine But Only On Full Blast...
2000 Ford Focus Blower Motor Only Blows On Low
Heater Problem 2000 Ford Focus 4 Cyl Front Wheel Drive Automatic 112k Miles Have A 2000 Zx3. Heater Motor Only Blows On Low Speed. Just...
2002 Ford Focus Blower
My Granddaughters Focus Is Blowing Fuses When You Turn On The A/c Blower, The Compressor Still Works. Is There A Relay Or Resistor Or...
Ask a Car Question. It's Free!
How to Use a Test Light
Blower Fan Replacement
How to Replace the A/C Blower Motor
Find a car manual for your car
Terms & Conditions
© 1999 - 2018 2CarPros, Inc.