2001 Ford F-150 engine noise

Tiny
BBUERER
  • MEMBER
  • 2001 FORD F-150
Ok well again fixing the truck now I got a ticking noise when it just idles nothing if u give it a Lil gas abt 1000s rpms u kinda hear it but when I put it in gear it ticks really loud when I give it even just a Lil gas so Im scratching my head alil think maybe it's a rocker or phaser but I really don't know some kind of timing issue I think maybe let me know please
Thursday, March 5th, 2015 AT 4:08 PM

6 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Check torque converter bolts for being loose then try to see if it is in valve train area. It may also be a belt as well or tensioner.
Was this
answer
helpful?
Yes
No
Thursday, March 5th, 2015 AT 4:15 PM
Tiny
BBUERER
  • MEMBER
  • 8 POSTS
I forget what the parts called but I just had it in the shop and I had driveshaft problems and they replaced something on the back axle that connects to the drive shaft it was making lot of noise but I don't know if that could have done anything to The torque converter or not I didn't really notice it until a day after I got it back
Was this
answer
helpful?
Yes
No
Thursday, March 5th, 2015 AT 4:47 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
That wouldn't tick from engine if it was fixed on rear axle it could have been a ujoint in drive shaft.
Was this
answer
helpful?
Yes
No
Thursday, March 5th, 2015 AT 4:48 PM
Tiny
BBUERER
  • MEMBER
  • 8 POSTS
It wa s th e u joi nt they fix the noise is come from up front more on the passenger side in the value cover area when I drive it's u can hear that tick and kinda Like a Chirp ever once in awhile
Was this
answer
helpful?
Yes
No
Thursday, March 5th, 2015 AT 4:55 PM
Tiny
BBUERER
  • MEMBER
  • 8 POSTS
If I did it rite should be a recording of it on this message that's just putting it in gear and revving it up a little bit
Was this
answer
helpful?
Yes
No
Thursday, March 5th, 2015 AT 5:08 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
It didn't come through
Was this
answer
helpful?
Yes
No
Friday, March 6th, 2015 AT 7:00 AM

Please login or register to post a reply.

Sponsored links