Power steering belt tensionor

Tiny
DOMINIQUEW
  • MEMBER
  • 2001 DODGE NEON
  • 4 CYL
  • 2WD
  • 150,000 MILES
How do u take off a belt tensenior
Do you
have the same problem?
Yes
No
Saturday, January 1st, 2011 AT 1:19 AM

1 Reply

Tiny
WRENCHTECH
  • EXPERT
REMOVAL

NOTE: Slight axial movement of the tensioner arm is normal. Tensioner arm should move freely and maintain 50-70 lb. Tension on belt.

1. Remove engine mount bracket assembly.
2. Remove the tensioner pulley mounting bolt.
3. Remove the pulley.

INSTALLATION

1. Install tensioner pulley, dust shield, and bolt. Tighten bolt to 27 Nm (20 ft. Lbs.).
2. Install engine mount bracket assembly.
Was this
answer
helpful?
Yes
No
Saturday, January 1st, 2011 AT 2:38 AM

Please login or register to post a reply.

Recommended Guides