2000 Toyota Tacoma Will not crank

MANER

MEMBER
2000 TOYOTA TACOMA
124,000 MILES

I have replaced the fuel filter, EFI Relay, crankshaft sensor, cam sensor, air sensor and removed the throttle body and cleaned with sea foam deep creep and still will not crank. I turns over fine but will not start. Run diagnostic but shows no codes. Took fuel line loose and the pump is working because there is plenty of fuel coming through.

Thursday, June 6th, 2013 AT 11:18 AM

5 Replies

HMAC300

MECHANIC
48,601 POSTS

What is the fuel pressure in psi? Should be 38-44psi if not check pump or filter. Is it getting spark? Was efi fuse checked as well as ign fuse under dash?

Was this

answer

helpful?

Yes

No

Friday, June 7th, 2013 AT 7:06 AM

MANER

MEMBER
3 POSTS

Fuel pressure checked and good. Have not changed IGN fuse under dash. Could it be the 120A alt fuse?

Was this

answer

helpful?

Yes

No

Friday, June 7th, 2013 AT 7:38 AM

HMAC300

MECHANIC
48,601 POSTS

If that fuse was blown nothing would work on truck. Try resetting your security system on your truck I don't know how to reset it but if you have amanual that will let you know. Or if it is not resettable try adifferent key

Was this

answer

helpful?

Yes

No

Friday, June 7th, 2013 AT 9:25 AM

MANER

MEMBER
3 POSTS

Don't have security system or power windows or cruise.

Was this

answer

helpful?

Yes

No

Friday, June 7th, 2013 AT 10:11 AM

HMAC300

MECHANIC
48,601 POSTS

Check crank and cam sensors for resistance
cam 835-1400 cold
1060-1645 ht
crank 1130-2740c
2065-3225h
also do a wiggle test of cranks sensor for poor connection etc.

Was this

answer

helpful?

Yes

No

Friday, June 7th, 2013 AT 12:02 PM