2000 Mazda Protege

Tiny
NATASHA09
  • MEMBER
  • 2000 MAZDA PROTEGE
  • 4 CYL
  • FWD
  • AUTOMATIC
  • 174,000 MILES
I have a 2000 automatic protege and on the heater controls 1, 2, 3 and the A/C doesnt work but the 4th setting and defrost do. Can anyone give me a little insite as to what might be the problem. Please and thanks!
Friday, February 25th, 2011 AT 10:49 PM

6 Replies

Tiny
MHPAUTOS
  • MECHANIC
  • 31,938 POSTS
If this is the blower motor settings that have failed on low speed settings, it will probably be the fan speed resistor that has failed, I will have to go check on its location.

Mark (mhpautos)
Was this
answer
helpful?
Yes
No
Friday, February 25th, 2011 AT 10:51 PM
Tiny
MHPAUTOS
  • MECHANIC
  • 31,938 POSTS
It is behind the R/H side of the dash, I have no pic sorry.

Mark (mhpautos)
Was this
answer
helpful?
Yes
No
Friday, February 25th, 2011 AT 10:54 PM
Tiny
MHPAUTOS
  • MECHANIC
  • 31,938 POSTS
It will look like this, you will only see the black section screwed into the heater box.

Mark (mhpautos)
Was this
answer
helpful?
Yes
No
Friday, February 25th, 2011 AT 10:57 PM
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Disconnect the negative battery cable.
Remove the glove compartment.
Remove in the order indicated in the table.
Install in the reverse order of removal.
Was this
answer
helpful?
Yes
No
Friday, February 25th, 2011 AT 11:59 PM
Tiny
NATASHA09
  • MEMBER
  • 3 POSTS
How much is it to get a new resistor?
Was this
answer
helpful?
Yes
No
Saturday, February 26th, 2011 AT 1:49 PM
Tiny
NATASHA09
  • MEMBER
  • 3 POSTS
And thank you so much for helping me out
Was this
answer
helpful?
Yes
No
Saturday, February 26th, 2011 AT 1:50 PM

Please login or register to post a reply.

Sponsored links