The light comes on when its pressed. There's no clicking as its pressed and it doesn't lock, it just springs back up. What can cause this and how can I fix it?
Do you
have the same problem?
Yes
No
Monday, December 26th, 2011 AT 2:30 PM
3 Replies
HMAC300
MECHANIC
48,606 POSTS
The pdeal needs to be repaired, it probably is a new assembly that needs replacing. The lock isn't working that locks it in place.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, December 26th, 2011 AT 2:39 PM
MRPECK129
MEMBER
6 POSTS
Is it possible that something wasn't reconnected because it was working fine before I put it in the shop to have my heater core replaced. Got it back & the brakes didn't work and my washer fluid line was cut.
Was this
answer
helpful?
Yes
No
Monday, December 26th, 2011 AT 4:47 PM
HMAC300
MECHANIC
48,606 POSTS
Then if that is what happened take it back to the shop who replaced the heater core because they disconnected things and didn't put them back on. They should NOT charge you for this. It's their fault.