Mondeo st24 inlet manifold question.

Tiny
SAMPS1973
  • MEMBER
  • 2000 FORD MONDEO
  • 2WD
  • MANUAL
  • 78,000 MILES
Mondeo st24 v6 2.5l 24v

I am getting my injectors cleaned and tested as I have had poor power and starting problems.
while I was taking the injectors out I noticed the upper and lower inlet manifolds need a good clean.
I noticed something odd, on the manifolds 5 of the 6 primary(open)ports are very clean but the one at the back on the left is as black as the secondary ports.
does anyone know why this is?

thankyou!
Do you
have the same problem?
Yes
No
Saturday, January 29th, 2011 AT 10:52 PM

8 Replies

Tiny
WRENCHTECH
  • MECHANIC
  • 20,758 POSTS
That could indicate a bad injector? Did you record which cylinders the injectors were removed from?
Was this
answer
helpful?
Yes
No
Saturday, January 29th, 2011 AT 11:31 PM
Tiny
SAMPS1973
  • MEMBER
  • 6 POSTS
I did but I got them mixed up, hopefully the company whos testing them will find a bad one.
Thanks for your reply!
Was this
answer
helpful?
Yes
No
Sunday, January 30th, 2011 AT 12:17 AM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,758 POSTS
You're welcome
Was this
answer
helpful?
Yes
No
Sunday, January 30th, 2011 AT 12:19 AM
Tiny
SAMPS1973
  • MEMBER
  • 6 POSTS
I also done all the tests described on this site, the resistance was ok on all 6 I also checked the voltage and pulse tested the injector connectors and all seems to be ok.
Was this
answer
helpful?
Yes
No
Sunday, January 30th, 2011 AT 12:22 AM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,758 POSTS
You could have one varnished up inside the nozzle.
Was this
answer
helpful?
Yes
No
Sunday, January 30th, 2011 AT 12:24 AM
Tiny
SAMPS1973
  • MEMBER
  • 6 POSTS
Ok thanks ill let you know the results when they come back.
Thank you! Again.
Was this
answer
helpful?
Yes
No
Sunday, January 30th, 2011 AT 12:28 AM
Tiny
SAMPS1973
  • MEMBER
  • 6 POSTS
I got my injector results back, two of them were leaking which was causing the starting problems, it starts first time now and the power is much better, and the car runs much smoother.
Cheers.
Was this
answer
helpful?
Yes
No
Saturday, March 12th, 2011 AT 8:42 AM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,758 POSTS
Glad to hear you got it resolved.
Was this
answer
helpful?
Yes
No
Saturday, March 12th, 2011 AT 11:51 AM

Please login or register to post a reply.

Sponsored links