SPONSORED LINKS

Clicking from glove box wont start

Tiny
MRWINKIE72
  • MEMBER
  • 2000 DODGE DURANGO
  • 135,000 MILES
When I turn the key to the on position it begins to click in the glove box and from the fuse box in the engine compartment. I turn the key to start the engine and it clicks once under the car then starts clicking again from the glove box. It does have a new battery
SPONSORED LINKS
Saturday, November 5th, 2011 AT 7:50 PM

4 Replies

Tiny
CARADIODOC
  • MECHANIC
  • 33,737 POSTS
Sounds like you have loose or dirty battery cable connections. What happens to the brightness of the head lights or dome light when you try to crank the engine?
Was this
answer
helpful?
Yes
No
+1
Saturday, November 5th, 2011 AT 8:50 PM
Tiny
MRWINKIE72
  • MEMBER
  • 3 POSTS
Yes it does the lights dim when I try to start also I have to wait for the clicking to stop and the instrument cluster to come on before it will try and crank then it clicks once and no power when I try and start it.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, November 5th, 2011 AT 11:12 PM
Tiny
CARADIODOC
  • MECHANIC
  • 33,737 POSTS
The two most common places to cause problems are where the smaller red positive battery cable bolts to the under-hood fuse box and the smaller black negative wire bolts to the body. Shine those terminals up with some sandpaper and be sure the nuts are tight.
Was this
answer
helpful?
Yes
No
+2
Sunday, November 6th, 2011 AT 5:56 PM
Tiny
MRWINKIE72
  • MEMBER
  • 3 POSTS
Thank you I will try that if it doesn't work I will be back. Thankyou again
Was this
answer
helpful?
Yes
No
-1
Sunday, November 6th, 2011 AT 6:26 PM

Please login or register to post a reply.

Related Glove Box Content

VIEW MORE

Sponsored links