Front wheel hub/bearing assembly

Tiny
CAPTAINWISCH
  • MEMBER
  • 2000 DODGE DAKOTA
  • 6 CYL
  • 4WD
  • AUTOMATIC
  • 160,000 MILES
I am trying to find the correct torque spec. For front axle nut and hub/bearing assembly mounting bolts for my 2000 dodge dakota 4x4
Do you
have the same problem?
Yes
No
Thursday, March 17th, 2011 AT 12:06 AM

3 Replies

Tiny
BMRFIXIT
  • EXPERT
Its 126 FT lb
Was this
answer
helpful?
Yes
No
+1
Thursday, March 17th, 2011 AT 12:16 AM
Tiny
CAPTAINWISCH
  • MEMBER
BMRFIXIT,

thank you for your reply. Just to clarify. The 3 bolts that hold the hub/bearing assembly to the steering knuckle are torqued to 123 ft. Lbs. And the axle nut (hub nut) on the axle end gets torqued to 126 ft. Lbs. Once tighten does it need to be loosen then finger tight? Thanks again I look forward to hearing back.
Was this
answer
helpful?
Yes
No
Thursday, March 17th, 2011 AT 12:32 AM
Tiny
BMRFIXIT
  • EXPERT
Axle nut is @180 3 bolts is @ 123
and thats it
do not loosen
Was this
answer
helpful?
Yes
No
+2
Friday, March 18th, 2011 AT 12:57 AM

Please login or register to post a reply.

Recommended Guides