BECOME A MEMBER
It is free to join!
I AGREE TO THE
BECOME A MEMBER
2 SPARK PLUG IS MIS-FIRING
1999 Pontiac Grand Am
March, 30, 2012 AT 4:24 AM
I OWN A 1999 PONTIAC GRAND AM SE WITH A 2.4 L TWIN CAM. MY #2 SPARK PLUG IS MIS-FIRING ON AND OFF. I CHANGED OUT THE PLUGS, PLUG BOOTS, COIL PACK, CAM SHAFT SENSOR, FLUSHED THE MOTOR, WHAT ELSE CAN I TRY?
FOUND 5709 RELATED QUESTIONS
Runs Then Shuts Off As Soon As It Gets T
March, 30, 2012 AT 4:26 AM
Check or replace the plug. Make sure the injector is getting power.
March, 30, 2012 AT 4:39 AM
The injector is getting power, and the plugs are new. It runs good if I disconnect the cam shaft sensor.
April, 1, 2012 AT 5:34 PM
The service engine light and trac off light is going on and off now. The car is still running poorly
August, 16, 2012 AT 5:31 PM
ALL ALONG IT WAS THE INTAKE MANIFOLD GASKET!
to post a reply.
Engine performance problem 1990 mazda b2600 4 cyl four wheel drive manual 164000 miles the engine is missing and i have a loss of
Runs On Three Cylinders
I have the 1 6 motor and starts fine but after one minute or so it starts to go wonky and runs on three cylinders if you step up the
Mike in Canada
Mis Fire -
Following a spark plug and wire change and subsequent ignition fail sensor (part 27370 38000) change the car is not running well it t
Got A Rough Running Engine Misfire? Fix it Like The Pros
Ask a Car Question. It's Free!
Code Read Retrieval/Clear - Dodge Stratus
How to gather codes Ford Explorer
How to read codes Chevrolet Blazer
Code Read Retrieval/Clear Mercedes Benz
Step by Step video GMC Yukon XL 2000-2006
Code Read Retrieval/Clear
© 1999 - 2015 2CarPros, Inc.