98 Plymouth Breeze engine turns over will not start

Tiny
GEARHEAD58
  • MEMBER
  • 1998 PLYMOUTH BREEZE
  • 166,000 MILES
Enigne craks but will not start checked crank and camshaft sensors checked good, got fire and fuel, still engine acts like it wants to sart but will not
Do you
have the same problem?
Yes
No
Sunday, February 12th, 2012 AT 5:03 AM

3 Replies

Tiny
2CEXPT
  • MEMBER
Check fuel pressure and injector pulses
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, February 12th, 2012 AT 5:23 AM
Tiny
GEARHEAD58
  • MEMBER
Fuel pressure is 50 psi as it should be. Checked crank and cam sensors checked good with in spec's, checked both fuel pump and ASD relays they checked good, here's what has me puzzled now when crank and cam semsors are connected I get fuel preesure but no fire now with cam sensor disconnected I get both fuel and fire but no engine start up I hear popping going on in the cylinders and after several attempts it will blow back through the trottle body but only unbrunt fuel?
Was this
answer
helpful?
Yes
No
Sunday, February 26th, 2012 AT 2:04 AM
Tiny
2CEXPT
  • MEMBER
Check the crankshaft positon sensor again
Was this
answer
helpful?
Yes
No
+1
Sunday, February 26th, 2012 AT 2:26 AM

Please login or register to post a reply.

Related Engine Not Running Content

How to fix an engine that wont start
VIDEO
How to fix an engine that wont start
Instructional repair video
How to fix an engine not starting (running)
GUIDE
How to fix an engine not starting (running)
Observing lights and sounds when the engine is not starting is essential, these steps can give you a direction to proceed which are listed in order of difficulty.
VIEW MORE

Sponsored links