SPONSORED LINKS

Turning over but not firing

Tiny
PAIGED
  • MEMBER
  • 1998 PLYMOUTH BREEZE
I have a 1998 Plymouth breeze with a 2.0. It is turning over but not firing I have changed the crank sensor, timing belt, cam shaft sensor, coil pack.

AND I HAVE ALSO CHANGED THE COMPUTER AND STILL NO FIRE AND I WOULD ALSO LIKE TO KNOW WHAT THE TCM RELAY IN THE FUSE BOX IN THE ENGINE COMPARTMENT IS FOR
SPONSORED LINKS
Sunday, August 26th, 2012 AT 1:11 AM

6 Replies

Tiny
PAIGED
  • MEMBER
  • 4 POSTS
I MEANT CAM SHAFT SENSOR AND COIL PACK
Was this
answer
helpful?
Yes
No
Sunday, August 26th, 2012 AT 1:13 AM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Tcm is trans control module.

First, did you have the computer flashed?

Did you do basics, compression fuel pressure and spark test?

Roy
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, August 26th, 2012 AT 1:27 AM
Tiny
PAIGED
  • MEMBER
  • 4 POSTS
I was driving the car it was running fine and it quit firing I have changed all those parts and it still isnt firing I have changed the plugs plug wires and everything else I could possibly think of. It is driving me insane because I cant figure out the problem. Yes I have had the computer flashed
Was this
answer
helpful?
Yes
No
Sunday, August 26th, 2012 AT 1:31 AM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
What about the basics?

Roy
Was this
answer
helpful?
Yes
No
Sunday, August 26th, 2012 AT 1:34 AM
Tiny
PAIGED
  • MEMBER
  • 4 POSTS
Like what basics please explain
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, August 26th, 2012 AT 1:37 AM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
As is said in my previous post, need compression test, fuel pressure check and spark check. Start there

Roy
Was this
answer
helpful?
Yes
No
+1
Sunday, August 26th, 2012 AT 1:39 AM

Please login or register to post a reply.

Related Engine Not Cranking Over Content

Not Cranking Over
GUIDE
Not Cranking Over
When your engine is not cranking (turning) over it will be mainly due to three separate areas, first it could be the battery, cables or poor connection, next is the starter...
VIEW MORE

Sponsored links