The truck turns over but it wont start. It will start if you put gas in it manually. I checked the fuel pressure and also used a noid light and they both were ok.
SPONSORED LINKS
Do you
have the same problem?
Yes
No
Saturday, May 16th, 2015 AT 8:15 AM
3 Replies
HMAC300
EXPERT
Fuel pressure must be 41-47 psi if none or below it may be a bad pump. Scan for codes and if battery was disconnected try resetting security system.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+1
Saturday, May 16th, 2015 AT 11:52 AM
TWADZACK
MEMBER
The fuel pressure is at 45psi. I tried resetting security system still nothing.
Was this
answer
helpful?
Yes
No
Saturday, May 16th, 2015 AT 1:28 PM
HMAC300
EXPERT
Then scan for codes and check crank sensor. If it doesn't get an ignition signal the injectors won't get fuel.