Is there a way to confirm the fuel pump relay without replacing?
Tuesday, July 12th, 2011 AT 5:43 PM
2 Replies
JDL
MECHANIC
16,098 POSTS
If you have a fuel pump issue, check voltage and ground at the pump motor connector. Use a gage and check fuel pressure.
Sometimes the relays are pretty much the same, if they are, swap them out, for testing. I haven't looked at your wiring, as an example, swap the ac relay with fuel pump relay, where applicable.
Was this
answer
helpful?
Yes
No
Wednesday, September 2nd, 2020 AT 5:27 PM
JDL
MECHANIC
16,098 POSTS
Are you saying it cranks good but won't start? Engine cranking, do you have spark at the plugs?