Won't start fuel pump ok, psi ok. Fuel filter ok. What now?

Tiny
TSLEDGER
  • MEMBER
  • 1997 GMC JIMMY
  • 186,000 MILES
Drove home thursday. Every was normal. Went out friday morning and it wouldn't start. It turns over fine just won't start! Can put gas into carb (whatever!) Starts then quits when that gas is gone
Do you
have the same problem?
Yes
No
Tuesday, July 3rd, 2012 AT 5:50 PM

3 Replies

Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
What is your actual fuel pressure?Also have you checked for codes in the computer?Also have you checked for injector pluse with a noid light?
Was this
answer
helpful?
Yes
No
Tuesday, July 3rd, 2012 AT 6:04 PM
Tiny
TSLEDGER
  • MEMBER
  • 2 POSTS
Pressure 55 I don't know how to do a injector pluse!
Was this
answer
helpful?
Yes
No
Tuesday, July 3rd, 2012 AT 7:53 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
See if you can rent a noid light from the auto parts store it plugs in where the injectors plugs in. Then plug I into each connector crank the engine it should flash not stay on solid. Also any codes in the computer?I would check if you havent for codes?
Was this
answer
helpful?
Yes
No
Tuesday, July 3rd, 2012 AT 8:16 PM

Please login or register to post a reply.

Sponsored links