DO YOU HAVE TO REMOVE THE MOTORMOUNT TO ...

  • Tiny
  • Anonymous
  • 1997 Buick Lesabre

Do you have to remove the motormount
to reinstall the serpentine belt?

Saturday, December 8th, 2012 AT 9:11 PM

1 Answer

  • Tiny
  • ASEMaster6371
  • Expert
  • 25,550 posts

DRIVE BELT

CAUTION: The drive belt controls all engine-mounted accessories. All driven accessories rigidly mount to the engine. A spring-loaded drive belt tensioner maintains the drive belt tension. A drive belt squeak, occurring when starting or stopping the engine, it has not effect on drive belt durability. The drive belt tensioner can control the drive belt tension over a broad range of drive belt length. However, there are limits to the drive belt tensioner's compensation ability. When using the drive belt tensioner outside of its operating range, poor tension control and/or damage to the drive belt tensioner may occur.

3.8L VIN K

REMOVAL

Remove the following components.

The engine mounting bracket lower nut.
The engine mounting bracket lower stud.
The engine mounting bracket lower spacer.

Remove the belt.

INSTALLATION

Install the belt. Refer to Engine Mount in order to install the following components: The engine mounting bracket lower nut.
The engine mounting bracket lower stud.
The engine mounting bracket lower spacer.

Was this
answer
helpful?
Yes
No
Saturday, December 8th, 2012 AT 9:19 PM

Please login or register to post a reply.

Similar Questions