SPONSORED LINKS

1995 Toyota RAV4 CV Joints

Tiny
PRAVESH
  • MEMBER
  • 1995 TOYOTA RAV4
  • 200,000 MILES
CV axle is sliding out of the transmission when I turn, which is causing it to bind up and break when I straighten out I know for a fact the retaining clip is on there, I thought with that there it would take an excessive amount of force to remove the axle from the transmission.
SPONSORED LINKS
Saturday, October 5th, 2013 AT 1:37 PM

3 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
It does it has to be pryed out. If it keeps coming out either the retaining ring isn't in all the way or it's screwed up inside trans
Was this
answer
helpful?
Yes
No
Saturday, October 5th, 2013 AT 1:42 PM
Tiny
PRAVESH
  • MEMBER
  • 2 POSTS
What could be the faults inside the transmission, can I replace the inside gears
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, October 5th, 2013 AT 1:53 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
The gears in pic would be damaged, which you need to tear apart transmission to ge t to it. But make sure that you try to put axle allthe way in you shold hear a click when it goes in.
Image (Click to make bigger)
Thumb
Was this
answer
helpful?
Yes
No
Saturday, October 5th, 2013 AT 2:06 PM

Please login or register to post a reply.

Related CV Axle Replace/Remove Content

CV Axle Replacement
GUIDE
CV Axle Replacement
All front wheel drive and independent rear suspension cars utilize a CV axle to deliver power from the engine to the wheels. These CV axles have a six balls inside a CV...

Sponsored links