Any ideas? IM lost on this one lol

Tiny
SHAWNMELVILLE
  • 1995 JEEP GRAND CHEROKEE
  • 170,000 MILES

42re transmission stuck in limp mode and not giving codes already put in new govenor solenoid. Still in limp mode. Any ideas?

Do you
have the same problem?
Yes
No
Friday, September 7th, 2012 AT 10:30 PM

1 Reply

Tiny
HMAC300
  • EXPERT
  • 49,211 POSTS

You need apro type scanner to get codes from this if it's one at an auto parts then it won't pick up trans codes. Have a trans guy look at it before you waste more money on hit and miss fixes.

SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, September 7th, 2012 AT 11:21 PM

Please login or register to post a reply.

Related Engine Computer PCM Limp Mode Questions

While Driving My Jeep When Driving Onto On Ramps To...

While Driving My Jeep When Driving Onto On Ramps To Highways At Speeds Around 45 55 Mph My Jeep Decides To Throw Itself Into Limp Mode And...
Asked by Anonymous ·
1 ANSWER
2004
JEEP GRAND CHEROKEE

I Have A 99 Grand Cherokee Laredo 4.7 With A 45rfe...

I Have A 99 Grand Cherokee Laredo 4.7 With A 45rfe Transmission Which Is Currently In Limp Mode With A P1768 Code. How Can I Fix This Issue
Asked by thegrandlife ·
1 ANSWER
1 IMAGE
1999
JEEP GRAND CHEROKEE

1995 Jeep Grand Cherokee Please Help

To Start I Have A 1995 Jeep Grand Cherokee It Wont Start We Was Told It Was The Fuel Pump We Changed It Still Doesn T Start We Also Went...
Asked by travis ·
1 ANSWER
1995
JEEP GRAND CHEROKEE

This Jeep Run Ok After Cold Start It Has Good...

This Jeep Run Ok After Cold Start It Has Good Compression, New Plugs, Cap, Rotor, Wires, And #1 Injector When Cold Starting Is Runs Rough As...
Asked by sigyman ·
1 ANSWER
1995
JEEP GRAND CHEROKEE

Recommended articles