SPONSORED LINKS

1995 Jeep headlights

Tiny
JAMES GUSTAFSON
  • MEMBER
  • 1995 JEEP CHEROKEE
  • 6 CYL
  • 4WD
  • MANUAL
  • 106,000 MILES
I have a 1995 Jeep Cheroke that when you pull on the head light switch the hazzard lights, high beam indicator light up on the dash but the head lights do not work. You can move the high/low beam switch and it makes no diff. The hazzard lights will not work with the switch all the way out but do when it is pushed into the parking light position?
SPONSORED LINKS
Wednesday, December 8th, 2010 AT 3:37 PM

2 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Chec fuse 11 and 15 in your fuse block. There is a ground under the headlamp switch that may be loose. There also is a high beam relay on the left side of the radiator. There is also a headlampdelay module on the left side of the instrument panel. You might try smacking it or tapping it with a screewdriver handle. If the lights come on you've found your problem. The ground for that is the same one under the headlamp switch. Of course check your headlamp ground which is behind the pcm on the left fenderwell. Also check all your fuses in your power distribution center specifically #5. All or any of these can cause your problem.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, February 18th, 2019 AT 1:07 PM
Tiny
JAMES GUSTAFSON
  • MEMBER
  • 12 POSTS
Thank you
Was this
answer
helpful?
Yes
No
-1
Monday, February 18th, 2019 AT 1:07 PM

Please login or register to post a reply.

Related Headlight Switch Content

Headlight Switch
GUIDE
Headlight Switch
Manual headlight controls are executed by the driver or the body control computer auto is selected. The first position on a headlight switch is the running light ...
VIEW MORE

Sponsored links