Why does my A/C compressor make a clicling sound when the A/C is on?

Tiny
WILL-E-G
  • MEMBER
  • 1995 CADILLAC DEVILLE
  • 119,000 MILES
The air is cool but not so much
Saturday, June 23rd, 2012 AT 2:56 PM

11 Replies

Tiny
MHPAUTOS
  • MECHANIC
  • 31,938 POSTS
Have the system checked for leeks as the refregrant level may be low.
Was this
answer
helpful?
Yes
No
Saturday, June 23rd, 2012 AT 3:11 PM
Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
If the compressor is cycling, it could be a failing clutch, excessive pressure in system or a bad pressure switch.

Was anything done prior to this occurring?
Was this
answer
helpful?
Yes
No
-1
Saturday, June 23rd, 2012 AT 3:25 PM
Tiny
WILL-E-G
  • MEMBER
  • 4 POSTS
I replaced the compressor with a new one about a year ago, last year it worked fine, I have recharged it and it blows out semi-cool air now.I have checked the pressure and its at the normal level.
Was this
answer
helpful?
Yes
No
Sunday, June 24th, 2012 AT 12:43 AM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
What is the normal level? Freon level cannot be determined by pressures.

Roy
Was this
answer
helpful?
Yes
No
Sunday, June 24th, 2012 AT 3:38 AM
Tiny
WILL-E-G
  • MEMBER
  • 4 POSTS
The freon pressure is within the 25psi to 40psi level. With the a/c on at its highest level.
Was this
answer
helpful?
Yes
No
Sunday, June 24th, 2012 AT 2:10 PM
Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
What is the high side pressure?
Was this
answer
helpful?
Yes
No
Sunday, June 24th, 2012 AT 2:42 PM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
We need more exact info if you want us to help you.

Roy
Was this
answer
helpful?
Yes
No
Sunday, June 24th, 2012 AT 2:44 PM
Tiny
WILL-E-G
  • MEMBER
  • 4 POSTS
KHLow2008 not sure I dont have a fitting for that side, Roy basically I heard if my compressor is clicking it might be low on freon or the compressor clutch is bad. But I guess I will take it in for a check, maybe there's more to this. Thank you gentlemen for the advise and help.
Was this
answer
helpful?
Yes
No
Sunday, June 24th, 2012 AT 3:41 PM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
The low side fitting is back by the firwall and the high side is closer to the compressor.

Roy
Was this
answer
helpful?
Yes
No
Sunday, June 24th, 2012 AT 3:45 PM
Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
If the ompressor is cycling, it can be too high or low pressure or a failing clutch. It can also be due to electrical faults so a proper diagnosis is required.

The low and high pressure would be able to tell us something but if only one, then it does not help. A shop should be able to help you on this.
Was this
answer
helpful?
Yes
No
Sunday, June 24th, 2012 AT 6:24 PM
Tiny
WILL-E-G
  • MEMBER
  • 4 POSTS
Sounds good I will have it checked. Thanks again.
Was this
answer
helpful?
Yes
No
Sunday, June 24th, 2012 AT 7:54 PM

Please login or register to post a reply.

Sponsored links