I JUST REPLACED THE WATER PUMP ON MY 1994 4RUNNER V6. NOW IT WONT START. IT IS GETTING GAS AND SPARK.I HAVE EVEN MOVED THE DISTRIPUTER AROUND AND IT DONT MAKE ANY DIFFRENCE AT ALL. NOT SURE WHAT ELSE IT COULD BE OR WHAT ELSE TO CHECK. HOPING YOU CAN HELP
SPONSORED LINKS
Sunday, January 9th, 2011 AT 8:10 PM
3 Replies
ROMYSPEC
MEMBER
38 POSTS
Question, does it back fires? If so, Try checking the timing, be positive that all marks are lined up.
Was this
answer
helpful?
Yes
No
Sunday, January 9th, 2011 AT 8:25 PM
DANNY1
MEMBER
2 POSTS
It dont back fire and it pretty much just turns over it dont even act lkike it wants to start
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, January 9th, 2011 AT 9:08 PM
KHLOW2008
MECHANIC
41,815 POSTS
If the timing belt was not installed correctly, the ignition timing would be out and you could have a compression issue, this would not allow the engine to start.