SPONSORED LINKS

Fuel pump

Tiny
CHARLESRENTZ
  • MEMBER
  • 1993 OLDSMOBILE CUTLASS
  • 4 CYL
  • 2WD
  • AUTOMATIC
  • 126,000 MILES
How do you replace a fuel pump on a 1993 cutlass cierra
Saturday, January 29th, 2011 AT 9:06 PM

2 Replies

Tiny
WRENCHTECH
  • MECHANIC
  • 20,758 POSTS
You have to remove the fuel tank and install it from the top of the tank.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+1
Saturday, January 29th, 2011 AT 9:09 PM
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Remove or Disconnect

Relieve fuel system pressure.
Drain fuel tank.
Remove fuel tank.
Remove fuel sender assembly.
Note position of fuel strainer for installation. Support pump with one hand and grasp strainer with other hand.
Pull strainer off of pump and discard
Inspect - Fuel pump strainer. If strainer is contaminated, the fuel tank should be cleaned.

Disconnect fuel pump electrical connector
Place fuel sender assembly upside down on bench
Pull fuel pump downward to remove from mounting bracket, then tilt pump outward and remove from coupling hose
Image (Click to make bigger)
Thumb
Was this
answer
helpful?
Yes
No
+1
Saturday, January 29th, 2011 AT 9:12 PM

Please login or register to post a reply.

Related Fuel System Fuel Pump Replace/Remove Content

Fuel Pump Replacement
GUIDE
Fuel Pump Replacement
When a fuel pump goes out it can do so one of two ways either it can quit and stop working or it can fail intermittently causing the engine to stall or not start.
VIEW MORE

Sponsored links