BRAKE INSTALLATION

  • Tiny
  • coble
  • 1993 Mercedes Benz 190e
  • 156,000 miles

How I change the pads and rotors on my 190e?

Do you
have the same problem?
Yes
No
Monday, April 30th, 2012 AT 8:23 PM

2 Replies

  • Tiny
  • CJ MEDEVAC
  • Expert
  • 9,349 posts

A REPAIR MANUAL WOULD BE YOUR BEST FRIEND

http://www.2carpros.com/questions/2007-ford-taurus-tune-up

USING A REPAIR MANUAL AS "LAW" AND THIS LINK AS A GUIDE....YOU CAN PROBABLY PULL THIS OFF!

A GOOD MECHANICALLY INCLINED BUDDY, AND A CAMERA TO TAKE "BEFORE PICS" MIGHT HELP A NOVICE DIYer A LOT!

http://www.youtube.com/results?search_query=how+to+install+brake+pads+on+a+1993+Mercedes&oq=how+to+install+brake+pads+on+a+1993+Mercedes&aq=f&aqi=&aql=&gs_l=youtube.12...38949.51524.0.53398.10.10.2.0.0.0.46.260.8.8.0.

PLEASE DO, LET US KNOW HOW IT GOES

THE MEDIC

Was this
answer
helpful?
Yes
No
Monday, April 30th, 2012 AT 8:44 PM
  • Tiny
  • rasmataz
  • Member

DISC BRAKE CALIPER
Removal
Raise and support vehicle. Remove wheel and tire. Disconnect brake pad wear indicator sensor (if equipped). Disconnect and plug brakelines at caliper assembly. Remove caliper attaching bolts. Remove caliper assembly from vehicle.

DISC BRAKE ROTOR
Removal & Installation
Raise and support vehicle. Remove wheels. Remove caliper, and wire aside. Remove rotor-to-hub screws. Remove rotor. To install, reverse removal procedure.

Was this
answer
helpful?
Yes
No
Monday, April 30th, 2012 AT 8:46 PM

Please login or register to post a reply.

Similar Questions