SPONSORED LINKS

1992 Chrysler New Yorker No heat

Tiny
MAHLIN
  • MEMBER
  • 1992 CHRYSLER NEW YORKER
  • AUTOMATIC
  • 95,000 MILES
No heat but the temp on the engine gets hot not overheats but close too
Tuesday, December 1st, 2015 AT 1:56 PM

2 Replies

Tiny
JOHNNYT73
  • MECHANIC
  • 924 POSTS
Try to make sure that you have no air in the cooling system. When safe, remove the radiator cap. Top off with coolant and start the engine. Turn on the heat. Leave the engine running and raise the rpm to 2500 and hold for about 5 seconds. Keep doing that till it reaches normal operating temperature. Keep your eye on the gauge so you don't overheat. When its at operating temp and you have heat at idle then just put the cap back on and you should be good to go.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+1
Tuesday, December 1st, 2015 AT 2:23 PM
Tiny
MAHLIN
  • MEMBER
  • 2 POSTS
Ok well my gauges don't work so won't know how many rpm I be at and also put coolant and oil in other day it heated up n ran just fine then the next time I started it the belt came off got it back on n now does same thing no heat and almost over heats
Was this
answer
helpful?
Yes
No
Tuesday, December 1st, 2015 AT 2:46 PM

Please login or register to post a reply.

Related Heater Not Working Content

Heater Not Working
VIDEO
Heater Not Working
Instructional repair video
Heater Not Working
GUIDE
Heater Not Working
Step 1 - A heater cannot operate unless the engine is full of coolant/antifreeze. If coolant level is low check the system for leaks.
VIEW MORE

Sponsored links