Door lock question

Tiny
STORMJONES
  • MEMBER
  • 1992 CHEVROLET TRUCK
  • 230,000 MILES
I have a 1992 chevy next. Cab that I am trying to install a key less entry in. Its a viper 350hv and I can't figure out what wire goes where with the unlock and unlock. If you can answer my? Please help I bought a Haynes manual so I do have that.
Do you
have the same problem?
Yes
No
Sunday, January 22nd, 2012 AT 12:16 AM

9 Replies

Tiny
RIVERMIKERAT
  • MEMBER
Which Chevy truck do you have? We can send you schematics, but we need to know which truck you have. Chevy makes a few.

Did you buy the Viper system used? If not, where are the instructions?
Was this
answer
helpful?
Yes
No
Sunday, January 22nd, 2012 AT 1:15 AM
Tiny
STORMJONES
  • MEMBER
Yeah I bought it used from my brother and he threw it all away. My truck is a 1992 chevy 1500 with a 5.7 in it. It has power locks but they do not work.
Was this
answer
helpful?
Yes
No
Monday, January 23rd, 2012 AT 2:40 AM
Tiny
RIVERMIKERAT
  • MEMBER
And the door lock schematic for your truck. You'll have to determine why they don't work. Check the lock and unlock relays. Make sure the door solenoids are receiving power to lock and unlock the doors.
Was this
answer
helpful?
Yes
No
Monday, January 23rd, 2012 AT 4:38 AM
Tiny
STORMJONES
  • MEMBER
Thank you so much for your help!
Was this
answer
helpful?
Yes
No
Monday, January 23rd, 2012 AT 3:21 PM
Tiny
RIVERMIKERAT
  • MEMBER
My pleasure. Be sure to tell your friends about us.
Was this
answer
helpful?
Yes
No
Monday, January 23rd, 2012 AT 7:23 PM
Tiny
STORMJONES
  • MEMBER
Okay I'm lost is there a fuse for my door locks that I can replace and where is it?
Was this
answer
helpful?
Yes
No
Saturday, January 28th, 2012 AT 12:34 AM
Tiny
RIVERMIKERAT
  • MEMBER
There should be, but our reference doesn't list what fuse goes where. There is a relay for the power locks under the left side of the dash, on the brake pedal bracket.
Fuses attached.
Was this
answer
helpful?
Yes
No
Saturday, January 28th, 2012 AT 1:00 AM
Tiny
STORMJONES
  • MEMBER
Okay so I checked the bracket on the brake pedal but it doesn't have fuses attached to it. Is there anything else on the system I can check before tearing my truck apart.
Was this
answer
helpful?
Yes
No
Tuesday, January 31st, 2012 AT 9:59 PM
Tiny
CADIEMAN
  • MEMBER
Pull the lock switch out so u know the color wires to look for. Open the harness from the inside that goes to the door. Find the same 2 wires. Test the wires with a test light. To make sure u have the right wires when you lock and unlock the switch.
Was this
answer
helpful?
Yes
No
Tuesday, January 31st, 2012 AT 10:17 PM

Please login or register to post a reply.

Recommended Guides