MY 3

  • Tiny
  • Henry 88
  • 1992 Buick Regal
  • 140,000 miles

My 3.8 v6 didn't start this morning. It turns over but no spark, fuel pump seems to be running, tried starting fluid, no go. I'm thinking and have been told it might be the ignition module any way to have them check it to see if it's good or could it be something else?

Do you
have the same problem?
Yes
No
Friday, January 11th, 2013 AT 10:11 PM

3 Replies

  • Tiny
  • rasmataz
  • Member

Could be the ICM or the crankshaft position sensor-Scan the computer for code/s-start here-also go to this link under the igniiton system: http://www.2carpros.com/articles/car-cranks-but-wont-start

Was this
answer
helpful?
Yes
No
Friday, January 11th, 2013 AT 10:45 PM
  • Tiny
  • Henry 88
  • Member

Thanks for the info sorry it took so long to reply, but as it turned out it was the top coil that was bad. A friend had a spare put it on started right up. Seems I didn't check it at the coils. Lesson learned.

Was this
answer
helpful?
Yes
No
Tuesday, January 22nd, 2013 AT 1:00 AM
  • Tiny
  • rasmataz
  • Member

You're welcomed-Much thanks to you coming back with the fix, we all learn new things everyday-Good Luck

Was this
answer
helpful?
Yes
No
Tuesday, January 22nd, 2013 AT 2:05 AM

Please login or register to post a reply.

Similar Questions