1991 Acura Legend Blinkers

Tiny
LEGENDRAMIRO661
  • MEMBER
  • 1991 ACURA LEGEND
  • 3.2L
  • V6
  • RWD
  • AUTOMATIC
  • 190,000 MILES
Blinkers to my car are not working at all. I got all new bulbs for it. The dash lights for the blinker don't turn on but you can hear the clicking noise just no working turn signal lights. I checked the fuses the under the dash some don't work (its not the fuses) I used a probe to check ground and some connects don't have power running to them at all. The HAZARD fuse in the hood fuse box has one side working only theres power n one side of the fuse but not the other side. I did check relays and I do hear clicking I just don't know what it could be. One more other thing theres a lot of my fuses that some have current running on one side of them but no current running on the other unless that's normal well thanks a lot hope you guy can help
Thursday, January 1st, 2015 AT 9:43 PM

1 Reply

Tiny
CARADIODOC
  • MECHANIC
  • 34,330 POSTS
It sounds like you have a bunch of blown fuses. You're checking for voltage on both terminals if you're using a test light or voltmeter. There may not be voltage to a fuse if that circuit isn't turned on, but when you DO find voltage on one terminal, or side of a fuse, you must have it on the other one too. To have voltage on only one side is how we determine the fuse is blown.
Was this
answer
helpful?
Yes
No
Thursday, January 1st, 2015 AT 9:48 PM

Please login or register to post a reply.

Related Turn Signal Not Working Content

Turn Signal Problems
GUIDE
Turn Signal Problems
Turn signals are intended to help inform surrounding drivers of the vehicle's intended change in direction. Although there are a few different causes for signal failure...