Need advice on troubleshooting

Tiny
BUCKHUNTER.3030
  • MEMBER
  • 1990 CHEVROLET SILVERADO
  • 200,000 MILES
I drove my truck to work, it ran like a dream, When I went to leave work it would turn over but not start. After I tryed a different battery I learned that I wasn't getting fuel or spark, but I can hear the fuel pump kick in. I am lost as to why it would go from running perfect to not running at all so fast. Please help
Do you
have the same problem?
Yes
No
Tuesday, February 21st, 2012 AT 8:07 PM

6 Replies

Tiny
FIXITMR
  • MEMBER
What motor?
Was this
answer
helpful?
Yes
No
Tuesday, February 21st, 2012 AT 8:08 PM
Tiny
BUCKHUNTER.3030
  • MEMBER
350 tbi
Was this
answer
helpful?
Yes
No
Tuesday, February 21st, 2012 AT 8:19 PM
Tiny
FIXITMR
  • MEMBER
Sounds like hall effect switch or ignition module.
Was this
answer
helpful?
Yes
No
Tuesday, February 21st, 2012 AT 8:34 PM
Tiny
BUCKHUNTER.3030
  • MEMBER
Thank you will try
Was this
answer
helpful?
Yes
No
Tuesday, February 21st, 2012 AT 8:49 PM
Tiny
BUCKHUNTER.3030
  • MEMBER
I purchased a whole new distibutor shaft complete with the parts mentioned above, Now can I just mark the old one and put the new one in the same way? Or is it still important to be at TDC? And if so, how do I get no 1 cylinder to TDC?
Was this
answer
helpful?
Yes
No
Tuesday, February 28th, 2012 AT 6:09 PM
Tiny
FIXITMR
  • MEMBER
Sure just mark and pull and change. I just did that on mine for new shaft o-ring.
Was this
answer
helpful?
Yes
No
Wednesday, February 29th, 2012 AT 6:13 AM

Please login or register to post a reply.

Recommended Guides