1990 Chevrolet S-10 Starter removal

Tiny
ENCHILADEEDA
  • MEMBER
  • 1990 CHEVROLET S-10
  • 4.3L
  • 6 CYL
  • 4WD
  • MANUAL
  • 200,000 MILES
Trying to remove starter but not enough room to get it out. Is there some secret trick or do we have to jack up the engine or what? Thanks
Do you
have the same problem?
Yes
No
Thursday, September 17th, 2015 AT 1:04 PM

3 Replies

Tiny
HMAC300
  • EXPERT
Jack up front of truck jack stand under frame remove two bolts and wiring connections drops out no problem installs in reverse order.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, September 19th, 2015 AT 6:30 AM
Tiny
ENCHILADEEDA
  • MEMBER
No it doesn't, I assure you. I also thought it would be that easy but starter is still hanging under truck. There is no clearance to remove it. I did call my friend at NAPA and was told the only way to get it out was to either remove the cross-member, which is welded or loosen the motor mount on that side and jack up the engine. We are trying this next. Thanks, for you answer tho'.
Was this
answer
helpful?
Yes
No
Saturday, September 19th, 2015 AT 10:11 AM
Tiny
HMAC300
  • EXPERT
Try this grind a little of the pass side diff bracket, jack engine up and remove flex plate cover should come right out.
Was this
answer
helpful?
Yes
No
Saturday, September 19th, 2015 AT 12:35 PM

Please login or register to post a reply.

Related Starter Replace/Remove Content

Starter Replacement
VIDEO
Starter Replacement
Instructional repair video
Starter Motor Replacement
GUIDE
Starter Motor Replacement
A starter motor is a high torque motor that utilizes a small pinion gear to contact the flywheel and a starter solenoid to initiate the electrical connection when the...
VIEW MORE

Sponsored links