1989 Ford F-250 ekectrical

Tiny
MIKET72
  • MEMBER
  • 1989 FORD F-250
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 130,000 MILES
To the fuel pum I ran a hot wire from the fuel relay to t I replace the fuel pump relay the pigtail also the ECU relay in pigtail have built both been I replace the fuel pump relay the pigtail also the EEC relay in pigtail have built both been replaced the fuel pump fuel pumps been replaced.
Do you
have the same problem?
Yes
No
Thursday, January 30th, 2014 AT 11:44 AM

3 Replies

Tiny
HMAC300
  • EXPERT
What are you trying to ask?
Was this
answer
helpful?
Yes
No
Thursday, January 30th, 2014 AT 11:58 AM
Tiny
MIKET72
  • MEMBER
Im not getting power from the relay to the pump, what can I check
Was this
answer
helpful?
Yes
No
Thursday, January 30th, 2014 AT 12:26 PM
Tiny
HMAC300
  • EXPERT
Check the relay first with a like relay. Then check the inertia switch to see if it has been activated it's under the dash near brake pedal. You push the button to make it work if it's activated. Also if no power to relay check the fusilble link it's a blue wire running off starter relay
Was this
answer
helpful?
Yes
No
Thursday, January 30th, 2014 AT 12:35 PM

Please login or register to post a reply.

Recommended Guides